Raspberry Pi Raspbian

Raspbian Stretch で PX-S1UD V2.0 と PX-BCUD を使う件

投稿日:

以前に書いた Raspbian Jessie の場合と同じですね。

PX-S1UD V2.0 と PX-BCUD を Raspberry Pi 3 Model B で使う件
https://hirooka.pro/?p=8670

Raspbian が Stretch になっていたので入れてみました。

unzip 2017-09-07-raspbian-stretch.zip
sudo dd bs=4M if=2017-09-07-raspbian-stretch.img of=/dev/sdXXX
sudo sync
1172+1 records in
1172+1 records out
4916019200 bytes (4.9 GB, 4.6 GiB) copied, 225.354 s, 21.8 MB/s

カーネルが 4.9 になったので、OS をインストールして PX-BCUD を挿すだけで使えるようになりました。PX-S1UD V2.0 はファームウェアを入れる必要がありますが。さらに、PX-BCUD に至ってはそもそももう売っていないですが。

Raspbian Stretch 2017-09-07
uname -a
Linux raspberrypi 4.9.41-v7+ #1023 SMP Tue Aug 8 16:00:15 BST 2017 armv7l GNU/Linux

挿してみた結果。

[ 7708.541383] usb 1-1.3: USB disconnect, device number 4
[ 7726.502822] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
[ 7726.633625] usb 1-1.5: New USB device found, idVendor=3275, idProduct=0080
[ 7726.633638] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7726.633646] usb 1-1.5: Product: PX-S1UD Digital TV Tuner
[ 7726.633654] usb 1-1.5: Manufacturer: PLEX Digital TV Tuner
[ 7726.689330] smsusb:smsusb_probe: board id=18, interface number 0
[ 7727.183163] smsmdtv:smscore_init_ir: IR port has not been detected
[ 7727.183177] smsusb:smsusb_probe: Device initialized with return code 0
[ 7727.203634] DVB: registering new adapter (Siano Rio Digital Receiver)
[ 7727.205002] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
[ 7727.205218] smsdvb:smsdvb_hotplug: DVB interface registered.
[ 7727.213163] usbcore: registered new interface driver smsusb

[ 7823.013494] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[ 7823.144344] usb 1-1.4: New USB device found, idVendor=3275, idProduct=0085
[ 7823.144358] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 7823.144366] usb 1-1.4: Product: PX-BCUD
[ 7823.144373] usb 1-1.4: SerialNumber: 0
[ 7823.187814] media: Linux media interface: v0.10
[ 7823.212251] Linux video capture interface: v2.00
[ 7823.227567] em28xx: New device  PX-BCUD @ 480 Mbps (3275:0085, interface 0, class 0)
[ 7823.227578] em28xx: DVB interface 0 found: isoc
[ 7823.227750] em28xx: chip ID is em28178
[ 7824.657279] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x705ac8db
[ 7824.657287] em28178 #0: EEPROM info:
[ 7824.657293] em28178 #0: 	microcode start address = 0x0004, boot configuration = 0x01
[ 7824.680824] em28178 #0: 	AC97 audio (5 sample rates)
[ 7824.680831] em28178 #0: 	500mA max power
[ 7824.680839] em28178 #0: 	Table at offset 0x24, strings=0x106a, 0x047a, 0x0000
[ 7824.681304] em28178 #0: Identified as PLEX PX-BCUD (card=98)
[ 7824.681312] em28178 #0: dvb set to isoc mode.
[ 7824.681681] usbcore: registered new interface driver em28xx
[ 7824.691632] em28178 #0: Binding DVB extension
[ 7824.702917] tc90522 4-0015: Toshiba TC90522 attached.
[ 7824.712606] qm1d1c0042 5-0061: Sharp QM1D1C0042 attached.
[ 7825.128017] DVB: registering new adapter (em28178 #0)
[ 7825.128041] usb 1-1.4: DVB: registering adapter 1 frontend 0 (Toshiba TC90522 ISDB-S module)...
[ 7825.129559] em28178 #0: DVB extension successfully initialized
[ 7825.129572] em28xx: Registered (Em28xx dvb Extension) extension

-Raspberry Pi, Raspbian

Copyright© hirooka.pro , 2013-2018 All Rights Reserved.